Skip to main content

Get help for ARIS Risk and Compliance

Copy losses

You can transfer loss data from assigned losses to a risk assessment.

Prerequisite

  • The values in the selected losses must be specified in the same currency.

  • The assessment type Quantitative must be selected.

Procedure. Procedure

  1. Open the risk assessment for which you want to transfer loss data from assigned losses.

  2. Click Assessment.

  3. Click Copy calculated values from selected losses Copy calculated values from selected losses. The Assign losses to risk assessment dialog is displayed.

  4. Enable the check boxes (Check box enabled) of the losses you want to transfer loss data from.

  5. Click Copy calculated values from selected losses Copy calculated values from selected losses. The Message dialog opens.

  6. Select whether you want to transfer values or not.

  7. Click OK.

  8. Click Save Save.

The values for the Amount of damages (minimum/average/maximum) and Reduced amount of damages (minimum/average/maximum) of the risk assessment are calculated from the Current loss per risk (gross/net) of the losses and automatically entered.

The gross loss is used as a basis for calculating the amount of damages. The net loss is used as a basis for calculating the reduced amount of damages, because it states the damages that would result, if the risk occurs and after the damages were reduced by a countermeasure. Thus, the net loss corresponds to the reduced amount of damages.

If several losses are selected for the transfer of loss data to a risk assessment, then the values are calculated in the following manner.

Minimum amount of damages:

The lowest total loss (gross) from the selected losses is transferred to the risk assessment.

Average amount of damages:

The sum of the total losses (gross) from the selected losses divided by the number of losses is transferred to the risk assessment.

Maximum amount of damages:

The highest total loss (gross) from the selected losses is transferred to the risk assessment.

Minimum reduced amount of damages:

The lowest total loss (net) from the selected losses is transferred to the risk assessment.

Average reduced amount of damages:

The sum of the total losses (net) from the selected losses divided by the number of losses is transferred to the risk assessment.

Maximum reduced amount of damages:

The highest total loss (net) from the selected losses is transferred to the risk assessment.